Welcome to Shenzhen Rui Chuang Da Electronic Co., Ltd. official website!

Online customer service
Customer service hotline
Customer service team:
在线客服
Service time:
-

0755-89509282

 

0755-89509880

 

tatspeaker@tatelec.com

Copyright 2017 (c) 深圳市锐创达电子有限公司.   

M6050

1.SPECIFICATIONCondenserMicrophone1DimensionΦ6.0×H5.22NetWeightApprox0.6g3SoundPressureLevel-50±2dB at1KHz(0dB=1Vμba)RL=2.2KΩVCC=3.0V4Impedance2.2K±30%Ω at1.1KHz,3.0V5CurrentConsumptionMax400μA(VCC=3.
Product Detail

1.SPECIFICATION

Condenser Microphone

1 Dimension Φ6.0×H5.2
2 Net Weight Approx 0.6g
3 Sound Pressure Level -50±2dB at1KHz(0dB=1Vμba) RL=2.2 KΩ VCC=3.0 V
4 Impedance 2.2K±30%Ω at 1.1KHz,3.0V
5 Current Consumption Max 400μA (VCC=3.0V)
6 Standard operation voltage 3.0V (1.1~10V)
7 Sensitivity reduction Within 3dB  1.5V
8 S/N ratio ≤58dB
9 Operating Temperature -20℃~+60℃
10 Store Temperature -10℃~+55℃

 

Dimensions    Unit: mm 

*Unit: mm; Tolerance: ±0.5mm Except Specified

 

2.Reliability Test

After any following tests the part shall meet specifications without any degradation in appearance and performance except SPL. SPL shall not deviate more than -10 dB from the initial value

 

2.1Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10℃. Input rated voltage

Resonant frequency, 1/2 duty Square wave.

 

2.2High Temperature Test

The part shall be capable of with standing a storage temperature of +85℃ for 96 hours.

 

2.3Low Temperature Test 

The part shall be capable of with standing a storage temperature of -40℃ for 96 hours.

 

2.4Humidity Test

Temperature:+40℃±3℃

Relative Humidity:90%~95% Duration: 48 hours and expose to room temperature for 6 hours

 

2.5Temperature Shock Test

Temperature:70℃ /1hour→ 25℃/3hours→-30℃/1hour→ 25℃/3hours (1cycle)

Total cycle: 10 cycles

 

2.6Drop Test

Standard Packaging From 1.2m(Drop on hard wood or board of 5cm thick, three sides, six plain.)

 

2.7Vibration Test

Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

 

Note:

As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.

 

3.Electrical And Acoustical Measuring Condition

1.MEASUREMENT CIRCUIT 2.STRUCTURE OF MICROPHONE

 

4.Frequency Response

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

All Categories

Product Messages

SD150

R10

BE2316W